NSG 3040 Rental - EFT 4.4kV, Surge 4.8kV, & Built-In Coupler

Coupling/Decoupling Network (CDN) Features 

• 3-Phase EFT & Surge (480V/32Amps)
• Laptop & ISO 17025 Calibration included
• Fully automated surge and / or burst coupling
• Free Technical Support & 2 Days Free Transit
• High accuracy switching technology
• Both IEC and ANSI coupling methods
• Turnkey Solution - Arrives Ready for Testing!

Overview

The Teseq CDN 3063 coupling decoupling network allows for 32Amp 480Volt three phase, EFT, Surge, and 100kHz ringwave for use with the NSG 3040 and NSG 3060. This testing accessory can be rented individually or together as an NSG3060 CDN3063 combination. This accessory is designed for maximum reliability in a wide range of test setups. 

This immunity test equipment includes both IEC and ANSI coupling methods. It also includes a Phase Rotation indicator ensuring correctly sequenced power connection, preventing damage to equipment under test (EUT). An A2LA accredited calibration is included in the EMC test equipment price.

The CDN3063 allows for coupling for testing to EN/IEC 61000-4-4, EN/IEC 61000-4-5, EN/IEC 61000-4-12, ANSI C62.41, ANSI C62.45, and UL 1449. Through new technology it offers the ANSI C62.41 coupling method, used to measure and track the mains voltage and simultaneously control the pulse phase angle. We also offer rentals of higher current and voltage networks including the CDN3083-S100 and CDN3083-B100. 

Coupling/Decoupling Network (CDN) Features 

• 100 A (AC or DC); 690 VAC, 1000 VDC
• ISO 17025 Calibration included
• Meets IEC 61000-4-4 Ed.3.0
• Free Technical Support & 2 Days Free Transit
• Manual CDN - Use Will Variety Of Generators
• Up to 8.8 kV burst pulses
• Turnkey Solution - Arrives Ready for Testing!

Overview

The CDN 3083-B100 is a manual, external three phase, 690V, 100A coupler/decoupler for the EFT/Burst generated by the NSG 3060, NSG 3040, or similar Teseq product. A2LA accredited calibration is included in the EMC testing accessory price. This product can has a maximum burst voltage of 8800 volts.

This ideal for industries and applications that require higher AC and DC voltages and currents, including power & telecom industry, renewable energy applications, electric vehicle and charging stations. Given that this accessories weighs roughly 11lbs, it allows placement of the coupling decoupling network to distances between it and EUT as required by the standard.

The CDN 3083 - B100 is designed for testing of electrical fast transients, specifically EN/IEC 61000-4-4. This testing accessory is often rented in conjunction with the CDN 3083-S100 for surge and ringwave. It is designed to be used with an EUT supply in AC mode up to 690V.

Coupling/Decoupling Network (CDN) Features

• 620 Voltage/ 100Amps 3-Phase EFT & Surge
• ISO 17025 Calibration included
• 440 Volts with NSG 3040
• Free Technical Support & 2 Days Free Transit
• Manual CDN - Secure Wire Connections
• Complies with IEC / EN 61000-4-5 and ANSI C62.45
• Turnkey Solution - Arrives Ready for Testing!

Overview

The Teseq CDN 3083-S100 is an external, manual, three phase, 620v, 100a coupler/decoupler for the combination wave/surge and 100kHz ringwave generated by the NSG3060 and NSG 3040. This Teseq Product enables coupling modes with all types of symmetrical and asymmetrical coupling given in the EN/IEC 61000-4-5 and ANSI C62.41 2002.

This coupling decoupling network comes assembled and on wheels, providing an easily maneuverable turnkey solution. An A2LA accredited calibration is included in the price of this test equipment. It is often used in conjunction with the CDN3083-B100 providing 100Amp coupling/decoupling for Burst/EFT (electrical fast transients). These products are ideal for applications that require high AC and DC voltages and currents.

The CDN30830-S100 has all components, surge decoupling networks, INA 3080s, INA 3084 and earth rails installed. This testing accessory also comes with several cables allowing for required connections to be made easily. It can be rented individually to supplement existing testing capabilities, must be used with NSG 3060 or NSG 3040, or in combination with either Teseq surge generator.

Coupling/Decoupling Network (CDN) Features 

• 270 Voltage/ 16Amps 1-Phase EFT & Surge
• ISO 17025 Calibration included
• Fully automated Surge and Burst coupling
• Free Technical Support & 2 Days Free Transit
• For Use Only with NSG 3060
• Both IEC and ANSI coupling methods
• Turnkey Solution - Arrives Ready for Testing!

Overview

The Teseq CDN3061 single phase coupler for use with the NSG 3060 Transient Immunity Tester for EFT, Surge and 100kHz Ringwave. This coupling/decoupling network is designed to be used with the NSG 3060 Immunity Test System. It comes with an ISO 17025 accredited calibration, technical support, and two free days transit time. This Teseq product is designed for maximum reliability, a diverse set of test setups, and both IEC & ANSI coupling methods.

The CDN 3061 network features a module for the power quality test required by EN/IEC 61000-4-11 and IEC/EN 61000-4-29. Automated variac accessories are available for connection to the CDN to perform the variation test described in IEC/EN 61000-4-11. Voltage variation test parameters are set via the generator’s user interface. Over temperature protection for the CDN 3061, which allows short term operation at currents exceeding the nominal rating, prevents damage to internal components.

This EMC immunity test product can be rented by itself or part of a system as the NSG 3060 CDN 3061. This Teseq tester provides coupling for both IEC and ANSI standards. The CDN 3061 utilizes the latest electronic component technology which guaranties remarkable phase coupling accuracy which exceeds the standard’s requirements.

Coupling Clamp (CCL) Features 

• New design, Includes Safety Cover & Interlock
• ISO 17025 Calibration & 2 Days Free Transit
• Compliant IEC 61000-4-4 Ed.2 & Ed.3
• Can Work With Many Immunity Generators!
• Replaces CDN 8014 and CDN 8015
• Turnkey Solution - Arrives Ready for Testing!

Overview

The Teseq CDN3425 (Teseq CCL) main purpose is to couple Burst/EFT pulses to data lines. It can also be used to couple to mains lines where no CDN is available; for example, high current lines >200 A. This coupling decoupling network (CDN) capacitive coupling clamp (CCL) comes with an ISO 17025 accredited calibration and works with a many conducted immunity generators. 

The new design is fully compliant with the specifications of IEC 61000-4-4 Ed 2.0 2004, as well as with the draft of EN/IEC 61000-4-4 Ed 3.0 to be published in 2012. This model also replaces earlier models CDN 8014 and CDN 8015.The coupling capacitance between the coupling clamp and the cable laid in it depends on the cable characteristics. 

External Transformer Features 

• Integrated function unit to NSG 3000 system
• ISO 17025 Accredited Calibration included
• Power line dips to 0%, 40%, 70% and 80%
• Complies with EN/IEC 61000-4-11
• Includes EUT power control switch
• Turnkey Solution - Arrives Ready for Testing!

Overview

The Teseq INA6502 is an automated external transformer for the NSG 3040 and NSG 3060 test systems to perform dips and interrupts testing. A2LA accredited calibration is included in the EMC rental equipment price. This product allows for reducing the incoming supply voltage by pre-set amounts. 

This Immunity Test Accessory is designed for easy handling and can be used in three different positions; laying, standing, or wall-mounted. Several control parameters can be accessed through the front panel including power and voltage selector rotary. This EMC test equipment also includes 16 A fuse located in the front of the unit for added protection.

The INA6502 tests to EN/IEC 61000-4-11 and power quality testing (PQT) with the 80% voltage position and to the large overcurrent capabilities in the step transformer. It provides four voltage dips allowing for testing to many standards and company requirements. This product can be controlled using the touch screen interface or the WIN 3000 remote control software.

Ethernet CDN Features 

• Max Current/Voltage 2kV/50Amps
• ISO 17025 Accredited Calibration included
• Coupling Mode: Common Mode 1,2, or 4 pairs
• Designed for Fig. 11 of IEC 61000-4-5/ Ed.3/77B/674A/CD:2012-05
• Turnkey Solution - Arrives Ready for Testing!

Overview

The Teseq CDN HSS-2 Coupling Decoupling Network is designed for convenient surge testing with 1.2/50 μs pulses, as defined in EN/IEC 61000-4-5, on unshielded symmetrical high speed telecommunication lines e.g. Ethernet. A2LA accredited calibration is included in the EMC rental equipment price. This product allows testing on ISDN and Ethernet with 10/100BaseT and 1000BaseT. With a surge test voltage of 2 kV is the maximal residual voltage at the AE port only 65 V due to the excellent decoupling network. Additional decoupling elements are not required to protect the auxiliary equipment (AE). 

EM Test Coupling/Decoupling Network Features 

• CDN for IEC/EN 61000-4-5 & IEC/EN 61000-4-12
• ISO 17025 Accredited Calibration included
• Used for Unsymmetrical/Unshielded Datelines 
• Free Technical Support & 2 Days Free Transit
• Test voltage up to 4 kV, 7 kV and 10 kV
• 20 mH decoupling inductor per line

Overview

EMTest CNV504N1.3 coupling/decoupling networks for unshielded  unsymmetrical interconnection signal/data lines. Surge pulses or Ringwave pulses are applied to unshielded unsymmetrical interconnected lines by means of standalone coupling/decoupling networks for 4 signal/data lines.

CNV 504 N1.3 combines three different applications; coupling of Surge pulse via capacitor or gas arrestor and coupling of Ringwave pulses via capacitor being required by EN IEC 61000-4-5 and/or EN IEC 61000-4-12. The required coupling mode, Differential or Common, can easily be selected by means of a simple jumper.

In accordance with EN IEC 61000-4-5 and EN IEC 61000-4-12 pulses are coupled via different coupling elements such as capacitors or gas arrestors depending on the characteristics of the line signals.

CDN Telecom/Communication 1Gbit/s Features

• Coupling unshielded and shielded lines with up to 4 pairs
• ISO 17025 Calibration & 2 Days Free Transit
• Surge test to 3kV (1.2/50us) & Burst Test to 4kV (5/50ns)
• Residual voltage max. 50V at 3kV Surge 
• Compatible to PoE and PoE+ requirements
• Turnkey Solution - Arrives Ready for Testing!

Overview