

EM Test UCS 200N50 - Rent Microburst Generator 50 Amp CDN
- Micropulse Generator for ISO, JASO, & SAE
- ISO 7637-2 Pulses 1, 2a, 3a, & 3b
- Built-in CDN Max 80 Volts 50 Amps
In Stock


EM Test LD 200N - Rent Load Dump Generator
- Generators Clipped Load Dump Pulses
- Tests to ISO 7637-2 & ISO 16750-2 Load Dump
- Built-in CDN Max 80 Volts 30 Amps
In Stock


EM Test VDS 200N15 - Rent 15 Amp Battery Simulator
- Pulses 4 and 2b (ISO 7637-2/ISO 16750-2)
- Maximum 60 Voltage 15 Amps
- Voltage Drop Simulator with Low Output Impedance


EM Test VDS 200N30 - Rent 30 Amp Voltage Drop Simulator
- Pulses 4 and 2b (ISO 7637-2/ISO 16750-2)
- Maximum 60 Voltage 30 Amps
- Voltage Drop Simulator with Low Output Impedance


EM Test UCS 200N100.2 - Rent Transient Generator 100 Amp CDN
- Micropulse Generator for ISO, JASO, & SAE
- ISO 7637-2 Pulses 1, 2a, 3a, & 3b
- Built-in CDN Max 80 Volts 100 Amps


EM Test AutoWave - Rent 2 Channel Waveform Generator
- 2-channel Arbitrary Waveform Generator
- Dual-Processor-Technology, 500kS/s sample rate
- Library of Standard Test Routines
In Stock


EM Test PFM 200N100 - Rent Automotive Power Fail Simulator
- Switch for Power Lines 100 A and Data Lines 2 A
- Fast Switch with Rise/Fall Times of 200ns
- Pulses E10 and E13 of the LV 124/LV 148
In Stock


EM Test RCB 200N1 - Rent FMC1278 Transient Generator
- Compliant Pulses to FMC1278 & EMC-CS-2009.1
- Pulses CI 220: A1, A2-1, A2-2, C-1 and C-2
- Pulses RI 130: A2-1, A2-2 with Coupling Test Fixture
In Stock


EM Test CA LV 124 - Rent LV 124 Verification Kit for PFM 200N100
- 10 Ohm & 100 Ohm Power Calibration Loads
- 1 Ohm & 1000 Ohm Data Line Calibration Loads
- Designed for up to 48 Volt Battery Lines
In Stock

EM Test CA ISO - Rent Resistor Kit for Load Dump Verification
- Includes all Required Load Resistor Values
- Resistors with very low inductance
- Highly accurate resistors (+/-1%)


EM Test CA EFT Kit - Rent EFT/Burst Pulse Verification Kit
- Calibration Kit Designed for EM Test Systems
- Compliant to IEC 61000-4-4 & ISO 7637, Annex D
- Includes KW 50 (50Ω) & KW1000 (1kΩ)
In Stock


EM Test ACC - Rent Automotive Capacitive Coupling Clamp
- ISO 7637-3 & OEM Compliant Solution
- Accepts Cables up to 40mm Diameter
- Solution for Testing Shielded Signal Lines
In Stock


EM Test VDS 200Q50.2 - Rent 50 Amp Battery Simulator
- -60 to +60 Volts 50 Amps Continuous
- Pulses 4 and 2b (ISO 7637-2/ISO 16750-2)
- Extended Range 80 Volts 40 Amps


EM Test AN 200N100 - Rent 100 Amp 5uH DC LISN
- Max 1000 Volts 100 Amps DC (150 Amp Peak)
- ISO 7637-2, ISO 11452-4, & CISPR 25 Compliant
- Switch for Selecting Testing Requirements
In Stock


EM Test AMP 200N2 - Rent LF Signal & Amplifier DC - 500 KHz
- Output Max. 160 V p-p, 50 V rms
- Output Current Max. 18 A rms
- Automatic Closed Loop Test Procedures


Conducted Transient Emissions Set ISO 7637-2 EM Test
- Electronic Switch, Artificial Network, & RS-Box
- BS 200N100 Electronic switch, 60V DC/100A
- AN 200N100 1,000V DC, 250V AC (up to 1kHz)