Home > Automotive EMC Test Equipment - EMI Rentals > EM Test UCS 200N100.2
EM Test UCS 200N100 - Side Front EM Test UCS 200N100 - Front EM Test UCS 200N100.2 - Back EM Test UCS 200N100.2 - Side Above EM Test UCS 200N100.2 - Front top
EM Test UCS 200N100 - Side Front
EM Test UCS 200N100 - Front
EM Test UCS 200N100.2 - Back
EM Test UCS 200N100.2 - Side Above
EM Test UCS 200N100.2 - Front top

EM Test UCS 200N100.2

Rent Transient Generator 100 Amp CDN
  • Micropulse Generator for ISO, JASO, & SAE
  • ISO 7637-2 Pulses 1, 2a, 3a, & 3b
  • Built-in CDN Max 80 Volts 100 Amps
  • Battery Switch & Overcurrent Protection
  • Current ISO 17025 Accredited Calibration

Included Accessories

  • Automotive EFT Generator 
  • Power Cable
  • Printed Manual
  • Calibration Documentation 
  • Software License
  • (4)Recessed Banana Jack Cords with Clips 
  • ISO.control Software on USB Stick
  • USB Cable
  • (4) MC Connectors
  • Pelican Case
Can't find something? Contact Us
Got Questions? Speak to an Expert +1 630-887-0329
Two FREE days transit with every rental

Related Equipment

In Stock
EM Test CCI Front Side EM Test CCI Side
EM Test CCI
Capacitive Coupling Clamp Rental
Teseq Transient ICC System - Compact Teseq Transient ICC System - Seperated
EM Test ISO 7637-3 ICC Test System
Rental Transient Injection Kit
In Stock
EM Test CA EFT Kit - Attenuators EM Test CA EFT Kit - Case & Accessories
EM Test CA EFT Kit
Rent EFT Pulse Verification Kit
In Stock
EM Test UCS 200N - Side Leg Up EM Test UCS 200N - Side
EM Test UCS 200N50
Rent Transient Generator 50 Amp CDN
In Stock
EM Test VDS 200Q10 - Front Side Stock EM Test VDS 200Q10 - Front
EM Test VDS 200Q10
Rent 10 Amp Battery Simulator

Description

The UCS 200Nx.2 Ultra-Compact-Simulator series for automotive transients unifies the capabilites of an EFT/Burst simualtor, a Micropulse simulator and the required coupling / decoupling network into one box. The UCS 200Nx.2 series is equiped to meet all international and most car manufacturer specifications from around the globe. The built-in coupling network ranges up to 200 A depending on the model and can be used and controlled by the LD 200N.

For tests beyond standard requirements the waveform parameters of the Micropulse generator can be varied in a wide range by using the so called FreeStyle mode.

Specifications:
General Specifications
Coupling network
80 VDC
Coupling network
100 A continuous
150 A @ 500 ms
Micropulse
Amplitude
20 V ... 600 V +/- 10 % (depending on pulse)
Rise time
1 ... 10 us +0/-50 % (depending on pulse)
Pulse width
50 ... 10'0000 us + /- 10 % (depending on pulse)
Internal Resistance Ri
2 ?, 4 ?, 5 ... 100 ? in 5 ? steps , 200 ?, 400 ?, 450 ? +/-20 % (depending on pulse)
Polarity
pos / neg
Repetition rate
0.2 ... 999 s +/- 20 %
Battery switch off t2
40 us ... 500 ms +/-20 % (depending on pulse)
Battery off t3
< 100 us
Burstpulse
Amplitude
25 ... 1000 V +/- 10
Rise time
5 ns +/- 30 %
Pulse width
150 ns +/- 30 %
Internal Restistance Ri
50 ? +/- 20 %
Polarity
pos / neg
Burst duration (t4)
�0.1 ... 999.9 ms
Repetition rate (t5)
1us to 10us in steps of 1 us
Pulse Duration
10 ... 9'999 ms
Frequency (f)
0.1 ... 200 kHz
Test duration
1 s ... 9'900 h
Dimensions
19 Inches /3HU
Video Guides
Introduction to UCS 200Nxx2 & ISO 7637-2
Related Videos
EM Test LD 200N Overview & Setup
EM Test VDS 200Q10 ISO 7637-2 Testing
EM Test AutoWave Waveform Generator Walkthrough
EM Test RCB 200N1 & Schwarzbeck TF 130-150 FMC 1278 RI130
Documentation