Capacitive Coupling Clamp Rental
In Stock - Order by 3 p.m. ships today

  • Construction as per IEC 61000-4-4 Ed.3
  • EFT/Burst Testing of Signal- and Datalines
  • Permissible Burst Voltage 7 kV
  • For Cable Diameter up to 40 mm
Got Questions? Speak to an Expert +1 630-887-0329
Two FREE days transit with every rental


The CCI is used to couple EFT/burst pulses to I/O lines as required in different European and international standards for immunity testing.

The coupling of the Electrical Fast Transients EFT/burst to signal lines can usually not be achieved by discrete capacitive coupling without interfering with the signal flow. It is often impossible to contact the required circuit (direct), e. g. coaxial or shielded cables. In this case the coupling is realized by the capacitive coupling clamp. The interference simulator can be connected on both sides of the coupling clamp.

 The IEC 61000-4-4 Ed 3.0 published 2012 recomends the calibration of the capacitive coupling clamp into a 50ohm coaxial load with the normative calibration kit CCI PVKIT 1.

Max Voltage
e 7.0 kV
Dimension Coupling plate
140 mm x 1000 mm
GND - Coupling plate, 100 mm
High voltage connector, coaxial
GND connection
4 mm plug, banana
EUT cable
up to 40 mm diameter
10.6 kg
General Data:
10 C to 40 C
Rel. humidity
Max. 85 %, non condensing
Atmospheric pressure
86 kPa (860 mbar) to 106 kPa (1,060 mbar)