EMC Partner ESD3000 - ESD HBM Module MIL-STD-883

EMC Partner HBM ESD Simulator:

  • ESD3000 DM-4 Human Body Module Simulator
  • Battery Powered, Durable, Capabilities to 30kV
  • Compliant MIL-STD-833, 100pf/1500Ω Network
  • Current ISO 17025 Cal & 2 Days Free Transit Time

Sale price$420
Request A Quote

Buy/Rent ESD3000 Modules & Networks


ESD Gun Features

      • Air Discharge & Contact-discharge - 16kV (100V Steps)
      • Used Purchase Includes 60 Day Warranty
      • Human Body Model Solution, 100pf/1500Ω R/C Network
      • Discharge detector, +/- Polarity, & Accessories available
      • Many Reprogrammed Standards & Software Included!
      • All Rentals - ISO 17025 Cal & 2 Days Transit Time


The ESD3000 DM 4 by EMC Partner is a hand-held, lightweight, electrostatic discharge gun provides ESD HBM simualation. The DM4 provides the 100pf/1500Ω Human Body Model (HBM) Resistance Capacitance (RC) network required for testing to MIL-STD-883. A2LA accredited calibration and technical support is included in the rental equipment price. The simulator and networks can be rented together, or the network can be rented individually.

EMC Partner software comes with the electrostatic discharge generator allowing for remote control and reports to be generated. The design of the interface for this ESD gun offers the user a quick way to change test parameters with one hand. It can also easily be mounted on a tripod allowing for long duration tests to be easy accomplished without user fatigue

The EMC Partner test equipment can be run with AA batteries or rechargeable battery pack. Electronic polarity reversal, including alternating polarity, is provided with the test equipment. This HBM ESD tester is ideal for testing to MIL-STD-883 and many standards that require testing relating to the human body model.

Data Sheet User Manual


Common Standards MIL-STD-883
Voltage Range Air Discharge  +/- 0.2kV to 16kV
Voltage Range Contact Mode +/- 0.2kV to 10kV
RC Network 150 pf/ 330 ohm
Resolution  100V

Repetition Rate  Single shot mode, variable 0.05 to 30s
Remote Control  Yes – D-sub
Programmable Voltage ramping and polarity
Battery Recharge Time  Time 10 x UM-3/AA batteries
Useable During Recharge  Yes
Weight 870 grams, 1.9 pounds
Dimensions 33×7.6×7.6 cm, 16x3x3 inches

Packing List/Accessories

Buy Used ESD3000 ESD Simulators & Accessories

There are a variety of testing accessories that are included with the simulator itself and that are available for purchase.

Take advantage of 60 warranty no available on Ebay.


Included with standard rental/purchase of ESD Simulator:

    • ESD Simulator/Gun
    • Network (DN) or Module (DM)
    • Calibration Documentation
    • RM3 Module (only for 30kV)
    • Air Discharge Tip
    • Contact Discharge tip
    • Metal Sphere (only for 30kV)
    • Ground Cable with Clamp
    • Battery Charger
    • Power Cord
    • HTE0600 (only for 30kV)
    • 10 AA Rechargeable Batteries (Installed)
    • User Manual
    • Calibration Certificate
    • Rs 232 Connector
    • White Case 


Transient Specialists: ESD Simulator Comparison 

Description: This overview video provides a comparison or review, of a variety of simulators for IEC 61000-4-2. It mentions

features of Mz-15 Minizap, Dito, ESD3000, and NSG 435 including setup and advantages for each. This video covers ESD

testers designed for IEC 61000-4-2 (150pF/330Ohm network) to 16kV.s Some considerations discussed include scree,

modifying testing parameters, used market considerations, and others. 

HV Technologies: ESD Tester Demonstration 

Description: This overview video, by HV Technologies, describes how to use the ESD3000 ESD Gun. It walks through

how you will receive the test equipment, including accessories, then how to manipulate testing parameters with

the touch screen. Finally, it shows how to change or add different networks or test accessories to the simulator.

You may also like

Recently viewed