Autowave Accessories

Battery Supply Simulator

In Stock

15Amp Automotive Battery Supply Features 

      • DC Power Supply Dips/Int - ISO 7637: 2b & 4
      • Laptop & ISO 17025 Calibration Included
      • 15 amp & 30 Amp modules available for delivery!
      • Independent Test Generator - Single Unit Solution
      • Free Technical Support & 2 Days Free Transit
      • Voltage up to 60V & Easily Integrated Into Setup
      • Turnkey Solution - Arrives Ready for Testing! 

Overview

The EM Test VDS200N series of automotive batter supply/voltage drop simulator provides testing capabilities for a variety of standards including ISO 7637. This series provides provides a diverse set waveforms recommended by both international and manufacturer standards. We offer rentals of both the 15amp (VDS 200N15) and 30amp (VDS 200N30) test solutions which can be used independently or integrated into an EM Test 200 series automotive immunity setup. This piece of test equipment comes with an ISO 17025 accredited calibration and a latop with software installed, providing a quick solution.

The Automotive EMC Test Equipment also allows for both pre-programmed Standard Test and modification of individual pulses. The EM Test iso.control software provides fast control of all test parameters providing and efficient and effective testing solution. This rental equipment comes will all required cords and software required to complete testing. An additional test system the VDS 200N30 with 30 amps is available for rent as well.

This automotive waveform generator can easily be integrated with the UCS200N and the LD200N automotive transient immunity generators for a complete automotive test system, similar to that of the NSG 5500. It provides current up to 200A (peak up to 1,000A) with low output impedance. This EM Test immunity generator provides unique testing capabilities and easy to use interface, making it ideal for a variety of automotive immunity testing needs.

30Amp Power Supply

30Amp Automotive Battery Supply Features

      • DC Power Supply Dips/Int - ISO 7637: 2b & 4
      • Laptop & ISO 17025 Calibration Included
      • 15 amp & 30 Amp modules available for delivery!
      • Independent Test Generator - Single Unit Solution
      • Free Technical Support & 2 Days Free Transit
      • Voltage up to 60V & Easily Integrated Into Setup
      • Turnkey Solution - Arrives Ready for Testing! 

Overview

The EM Test VDS200N series of automotive batter supply/voltage drop simulator provides testing capabilities for a variety of standards including ISO 7637. This series provides provides a diverse set waveforms recommended by both international and manufacturer standards. We offer rentals of both the 15amp (VDS 200N15) and 30amp (VDS 200N30) test solutions which can be used independently or integrated into an EM Test 200 series automotive immunity setup. This piece of test equipment comes with an ISO 17025 accredited calibration and a latop with software installed, providing a quick solution.

The Automotive EMC Test Equipment also allows for both pre-programmed Standard Test and modification of individual pulses. The EM Test iso.control software provides fast control of all test parameters providing and efficient and effective testing solution. This rental equipment comes will all required cords and software required to complete testing. An additional test system the VDS 200N15 with 15 amps is available for rent as well.

This automotive waveform generator can easily be integrated with the UCS200N and the LD200N automotive transient immunity generators for a complete automotive test system, similar to that of the NSG 5500. It provides current up to 200A (peak up to 1,000A) with low output impedance. This EM Test immunity generator provides unique testing capabilities and easy to use interface, making it ideal for a variety of automotive immunity testing needs.

Power Amplifier/Battery Supply

In Stock

25Amp Automotive Battery Supply Features 

      • Large Inrush Current Capability - Four quadrant operation 
      • Laptop & ISO 17025 Calibration Included
      • 25 Amp & 100 Amp modules available for delivery!
      • For Use With NSG 5500 & Autowave
      • Free Technical Support & 2 Days Free Transit
      • Capacitive Stability Mode & Fast Slew Rate
      • Turnkey Solution - Arrives Ready for Testing! 

Overview

The PA5840-75 by Teseq is an 25 Amp DC power supply for use with the Teseq NSG 5500 automotive EMC immunity test system. A2LA accredited calibration is included in the automotive EMI immunity test equipment rental price. This fast, reliable, and modular battery simulator and is designed to simulate 12, 24, and 42 V vehicle electrical systems. We also offer rentals of the PA 5840 100Amp version designed for use with Teseq automotive immunity generators/systems.

This Automotive EMC Test Equipment provides dips and interrupts for a diverse set of automotive EMI standards including ISO 7637, waveforms 2b and 4. The PA 5840 also allows for testing to military automotive immunity standards including MIL-STD-461E. This latest Teseq model has 4 quadrant operation, important in the EV environment.

The PA 5840 includes two gain settings for use and output ranges for power efficiency. This DC power supply needs a control unit to be used.This automotive transient immunity generators setup also allows for High bandwidth up to 150 kHz. To facilitate the most efficient testing we provide rentals of both the 100 amp and the PA 5840-300 100 Amp model.  

Power Amplifier/Battery Supply

In Stock

100Amp Automotive Battery Supply Features 

      • Large Inrush Current Capability - Four quadrant operation 
      • Laptop & ISO 17025 Calibration Included
      • 25 Amp & 100 Amp modules available for delivery!
      • For Use With NSG 5500 & Autowave
      • Free Technical Support & 2 Days Free Transit
      • Capacitive Stability Mode & Fast Slew Rate
      • Turnkey Solution - Arrives Ready for Testing! 

Overview

The PA5840-300 by Teseq is an 100 Amp DC power supply for use with the Teseq NSG 5500 automotive EMC immunity test system. A2LA accredited calibration is included in the automotive EMI immunity test equipment rental price. This fast, reliable, and modular battery simulator supply comes with up to 18 kW of power and is designed to simulate 12, 24, and 42 V vehicle electrical systems. We also offer rentals of the PA 5840 25Amp version designed for use with Teseq automotive immunity generators/systems.

This Automotive EMC Test Equipment provides dips and interrupts for a diverse set of automotive EMI standards including ISO 7637, waveforms 2b and 4. The PA 5840 also allows for testing to military automotive immunity standards including MIL-STD-461E. This latest Teseq model has 4 quadrant operation, important in the EV environment.

The PA 5840 includes two gain settings for use and output ranges for power efficiency. This DC power supply needs a control unit to be used.This automotive transient immunity generators setup also allows for High bandwidth up to 150 kHz. To facilitate the most efficient testing we provide rentals of both the 100 amp and the PA 5840-75 25 Amp model.  

Auto Power Failure/Switch System

In Stock

Power Failure Equipment Features 

      • Switch - Power supply (100A/200A) & Signal/Data lines (2A)
      • Laptop & ISO 17025 Calibration Included
      • Pulses E10 and E13 of the LV 124/LV 148 standard
      • Bidirectional Current Direction & Rise/fall time less than 200ns
      • Free Technical Support & 2 Days Free Transit
      • Separate Switch In Ground Line
      • Turnkey Solution - Arrives Ready for Testing! 

Overview

PFM 200N100 made by EM Test is a unique automotive power fail simulator for LV 124 / LV 148 and Microinterruptions as per manufacturer standards. A2LA accredited calibration is included in the EMC rental equipment price. The PFM200N100 series includes a switch for the power supply line from 100 mA to 100A and a separate witch in the ground return path. 

The PFM 200 N 100 has been designed to fully meet the requirements for E10, E13 and E14 of the LV 124 and the E48-09 of the LV148. It also allows performing microinterruptions with fast rise/fall time of as low as 200ns as required by GMW 3172, sec. 9.2.18. The PFM 200n100 when combined with the EM Test autowave, can be used as a substitute for the PFS 200n.

Capacitive Coupling Clamp ACC

In Stock

Automotive Capacitive Coupling Clamp Features 

      • ISO 7637 and many car manufacturer spec.
      • ISO 17025 Calibration Included
      • Accept cables up to 40 mm diameter
      • Characteristic impedance 50 Ohm
      • Solution for Testing Shielded Lines
      • Turnkey Solution - Arrives Ready for Testing! 

Overview

The EM Test capacitive coupling clamp by EMTest is used to couple pulses to I/O lines required in ISO 7637 waveform 3b and other automotive testing standards. It allows for cable up to 40mm in diameter and has a characteristic impedance of 50 ohms. An ISO 17025 accredited calibration is included in the EMC rental equipment price.

The effective coupling capacitance of the coupling clamp depends on the diameter and the material of the used cables. A typical estimated value can be expected around 100 pF. This clamp is specially designed to meet automotive standards specifically ISO 7637.

The coupling on signal lines of this Automotive EMC Test Equipment can usually not be effected capacitively without interfering with the signal flow. It is often impossible to contact the required circuit (direct), e.g. coaxial or shielded cables. In this case the coupling is realized with the capacitive coupling clamp. The interference simulator can be connected via a coaxial cable on both sides of the ACC coupling clamp.

Load Dump Pulse Generator

In Stock

Automotive Load Dump Generator Features 

      • Clipped Load Dump Generator - ISO 7637: 5a, 5b &7
      • Laptop & ISO 17025 Calibration Included
      • Selectable .5-38 Ohm Impedance (.1 Ohm Steps)
      • Independent Test Generator - Single Unit Solution
      • Free Technical Support & 2 Days Free Transit
      • Built in Coupler - 60volts/30amps (DUT limit)
      • Turnkey Solution - Arrives Ready for Testing!

Overview

The EM Test LD200N provides a effective test solution to ISO 7637-2 pulses 5 and 7, as well as many other international and manufacturer based standards/requirements. This Automotive Conducted Immunity Test Solutions simulate a load dump, the sudden battery disconnection causing an over voltage impulse. This stand alone generator includes an 60v/30a DC coupling decoupling network (CDN) for direct testing and an ISO 17025 accredited calibration, providing a ideal test solution! It is designed for use with 12, 24, or 42 volt supply systems and in conjunction with other EM Test 200 series of generators.

This immunity generator is an all in one system for testing high-energy pulses as required by ISO 7637. By means of a built-in clipping circuit it also generates clipped load dump pulses as per international standards as well as manufacturer requirements. The LD200N can be integrated with the UCS200N and VDS 200N for a complete automotive immunity test system, similar to the NSG 5500.  

This test equipment allows for both pre-programmed standard test and modification of individual pulses through the FreeStyle mode. It has an adjustable source impedance from, 0.5 Ω to 38 Ω in .1 Ω steps. To facilitate a turnkey solution, we include laptop with software with this rental arriving at the testing location ready for use.

EFT/Microburst Pulse Generator

In Stock

Automotive Electrical Fast Transient (EFT) Generator Features

      • Micropulse Generator Module (ISO 7637, SAE, and NISSAN)
      • Laptop & ISO 17025 Calibration Included
      • Built-in Battery Switch & Overcurrent Protection
      • Independent Test Generator - Single Unit Solution
      • Free Technical Support & 2 Days Free Transit
      • Built in Coupler Network - 80volts/200amps
      • Turnkey Solution - Arrives Ready for Testing!

Overview

The EM Test UCS200N series of automotive conducted immunity provides fast transient and microburst testing for SAE J1113, JASO, and ISO 7637-2 waveforms 1,2,3a,3b. This series of products come in a 60 volt, 50 amp (UCS 200N50) version and a 60 volt 100amp (UCS 200N100) Version, both of which can be easily integrated into existing EM Test automotive setups.  The built-in coupling network can be used and controlled by any unit of the LD200N, VDS200N and PFM200N series and comes with an A2LA accredited calibration (ISO 17025) is included in the equipment price.

This automotive test equipment is designed to meet many international and car manufacturer specifications from around the globe. Testing parameters can be modified easily through the display or via software. This Automotive EMC Test Equipment goes beyond standard's requirements waveform parameters of the Micropulse generator can be varied in a wide range by means of the FreeStyle mode.

This Teseq Automotive EMC generator includes an innovative color touch screen with intuitive menu structure and defined keys for Start / Stop / Pause, indicated by LED bars, enables the user to program test routines quickly and accurately. The UCS 200n50 also includes built in battery switch an over current protection for added testing safety. This test system can be integrated with the LD200N and VDS200N automotive transient immunity generators for a complete immunity test system, similar to that of the NSG 5500.

Transient Immunity Pulse System

EM Test Automotive Immunity System

      • ISO 7637-2 & OEM Standards - Single Solution
      • Laptop & ISO 17025 Calibration Included
      • VDS200N, LD200N, UCS200n, & CCL Combination
      • Diverse Immunity Standard Testing Capabilities
      • Free Technical Support & 2 Days Free Transit
      • Prorated Daily Rate After First Month
      • Turnkey Solution - Arrives Ready for Testing! 

Overview

The EM Test VDS200N, LD200N, UCS200N, & ACC provides a full ISO7637 test solutions and comes with an ISO 17025 accredited calibration. This system is controlled through software through the laptop, which has the required information already installed. This system is a combination of sevearl different Automotive EMI products providing a complete test system. Each one of the major components can be rented individually, comes with a laptop, and is calibrated to ISO 17025. We offer rentals, as short as a week, providing a cost effective solution for a short term testing need.