EM Test CNI 508N2
Related Equipment
Description
The CNI 508N2 from AMETEK CTS is the first coupling/decoupling network available on the market to couple Surge onto shielded and unshielded high-speed communication lines with data rates up to 1,000MBit/s. Additionally, the CNI 508N2 can be used as a coupling/decoupling network to apply Burst- as well as Surge pulses to unshielded symmetrical interconnection lines. The CNI 508 N2 meets the requirements according Figure 11 and Figure 12 to the standards IEC 61000-4-5 (Ed. 3.0 :2014).
The CNI 508N2 is specially designed for the testing of high-speed communication lines. It allows data transfers up to 1,000 Mbit / s without affecting the signal. It also supports PoE and PoE + standard requirements as per IEEE 802.3af-2003 and IEEE 802.3at-2009.
The CNI 508N2 includes two surge pulse inputs. One for the direct coupling to lines and one for coupling to the cable shield (see tests to shielded cables as per IEC 61000-4-5).
- Specifications
- Surge Test Mode:
- Coupling mode
- shielded and unshielded cable with up to 4 pairs
- Test voltage
- Max. 3kV* (1.2/50us) (* only with connected RJ45 connector; if left open the max. test voltage is limited to 1.5kV
- Residual voltage
- Max. 50V @3kV Surge, line - PE
- Burst Test Mode:
- Coupling mode
- shielded cable with up to 4 pairs
- Test voltage
- Max. 4kV* (5/50ns) (* only with connected RJ45 connector; if left open the max. test voltage is limited to 1.5kV)
- Residual voltage line - PE
- Max. 40V @2kV Burst,
Max. 60V @4kV Burst - Telecom Line Specifications
- Input/Output
- RJ45 female connectors for telecom lines
- Terminal layout
- Pair 1: pins 1/2
Pair 2: pins 3/6
Pair 3: pins 4/5
Pair 4: pins 7/8 - Data rate
- up to 1,000MBit/s
- Protection
- +- 60V between two pairs
- Operating voltage
- max. 57VDC
- Operating current
- max. 1A
- Inputs:
- Surge shield
- SHV connector
- Surge unshielded
- SHV connector
- Burst
- SHV connector
- General Data:
- Dimensions
- 270mm x 110mm x 140mm (LxWxH)
- Weight
- 6.5kg
- Temperature
- 5�C - 40�C (operation)
- Rel. humidity
- 10% - 90%, non condensing
info@transientspecialists.com