Home > Automotive EMC Test Equipment Rentals > CA BS 200N
EM Test CA BS 200N Front Side EM Test CA BS 200N Front EM Test CA BS 200N Back EM Test CA BS 200N Front Top EM Test CA BS 200N Front Side Above
EM Test CA BS 200N Front Side
EM Test CA BS 200N Front
EM Test CA BS 200N Back
EM Test CA BS 200N Front Top
EM Test CA BS 200N Front Side Above

CA BS 200N

Load Impedance for BS 200N

  • 0.6ohm / 50uH Load as per ISO 7637-2:2004
  • Max Supply Voltage 28VDC
  • Max Load Current 50A
  • Built-in 10, 20, 40, & 120 Ohm Resistors
Got Questions? Speak to an Expert +1 630-887-0329
Two FREE days transit with every rental

Related Equipment

EM Test Transient Emissions Test Set - Side Front EM Test Transient Emissions Test Set - Side
EM Test Conducted Transient Emissions Test Set
EM Test BS 200N100 Front Side EM Test BS 200N100 Side Top
EM Test BS 200N100
Electronic Switch for Voltage Transient Testing
In Stock
EM Test AN 200N100 Front Side EM Test AN 200N100 Front Top
EM Test AN 200N100
Rent 100 Amp 5uH DC LISN
In Stock
Teseq HV-AN 150 Front Side Teseq HV-AN 150 Front Top
Teseq HV-AN 150
Rent 5uH 150 Amp LISN/Artificial Network
In Stock
Teseq SME HV-AN 150 - Front Side Teseq SME HV-AN 150 - Front Open
Teseq SME HV-AN 150
AN Shielded Metal Enclosure
Schwarzbeck NNHV 8123-200 Front Side Schwarzbeck NNHV 8123-200 Front
Schwarzbeck NNHV 8123-200
Rent 5uH 200 Amp DC LISN

Overview

CA BS 200N - Load Impedance for BS200Nx Electronic Switches The switching behaviour of the BS 200N series semiconductor switches shall be verified on 0.6ohm to 50uH load inpedance. The CA BS 200N is directly connected to the output of the BS 200Nx. The switching parameters of the BS 200Nx are measured with the load connected. Additionally, the CA BS 200N includes a number of shunt resistors Rs such as 10ohm, 20ohm, 40ohm and 120ohm being required as per standards used during the emission measurement of transients as per ISO 7637-2:2011 and the former ISO 7637-2:2004.

Max battery supply voltage
28Vdc
Load current
Max. 50A
Operating time
13.5V supply approx. 1 hour
28.0V supply approx. 10 minutes
Overheat indication
LED
Protection
Switch Off (overtemperature sensor)
Cooling
Forced Air
Load
0.6ohm in series with 50uH
Parallel load resistor
10, 20, 40 or 120ohm, selectable via short circuit connectors
Dimensions
19 Inches /3HU, 133mm x 500mm x 500mm
Weight
19.1kg
Mains supply
80V to 240Vac
Fuse
1A slow blow
Documentation