Description
Surge Pulse Geneartor Features
- 1.2/50us Surge Pulse to 6.6kV
- Constant Energy of .5J at Each Test Level
- 500 Ohm Source impedance
- ISO 17025 Accredited Calibration included
- Warning Lamp & Peak Voltage/Current Measurement
- Turnkey Solution - Arrives Ready for Testing!
Overview
The VSS 500N6.4 by EM Test provides the common surge immunity testing waveform (1.2/50us) to 6.6kV to IEC 60255-27 test levels 1-5. This equipement is ideal for overvoltage tests on protection relays and has no-load waveshaping. The no-load waveshape corresponds to IEC-61180-1. For this kind of testing the IEC 60255-27 standard requires a fixed energy of 0.5 J at the 1000 V and 5000 V test levels. To comply with safety regulations the VSS 500N6 is equipped with a contact to control warning lamps and with a safety interlock. This test generator comes with an ISO 17025 accredited calibration and meets IEC 60255-27 .5 J energy requirements.
Data Sheet User ManualSpecifications
Common Standards |
IEC 60255-27 |
VSS 500N6.4 |
0.55kV, 1.0kV, 3.0kV, 5.0kV, 6.6kV |
Standards |
IEC 61000-4-4, ed.3 |
VOLTAGE SURGE SIMULATOR, PULSE 1.2/50 US |
|
Voltage (o.c.) |
250 V - 6,600 V ±10 %, |
Pulse front time |
1.2 us ± 30 % |
Pulse time to half value |
50 us ± 20 % |
Source impedance |
500 Ohm |
Energy |
0.5 J ± 0.05 J at each test level |
Pulse forming |
As per IEC 60255-27 (previous -5) |
Polarity |
Positive, negative or alternating |
Event counter |
1 - 30,000 or endless |
TRIGGER |
|
Trigger of events |
Automatic, manual, external |
CRO trigger |
5V trigger signal for oscilloscope |
Synchronization |
0° - 360°, resolution 1° |
Repetition rate |
6 s - 999 s, depending on the voltage |
OUTPUT |
|
Direct |
Via HV connector; Zi = 500 Ohm To connect externaltest boxes or devices |
MEASUREMENTS |
|
Peak voltage |
6,600 V in the LCD display |
Peak current |
13 A in the LCD display |
Standards
Widely Used Standards
This list is a more comprehensive list of all the standards covered with this immunity generator. This is by no means all the standards covered, but the major ones from the largest manufacturers and most widely used standards.
-
- ANSI/IEEE C37.90
- EN 60255-27
- EN 60255-5
- IEC 60255-27
- IEC 60255-5
- IEC 60747-5
- IEC 61180-1
- IEC 62052-11