ESD Test Setup Accessories

Showing 1 to 9 of 16 products

Electrostatic Discharge Setup

In Stock

ESD Test Table - IEC 61000-4-2:

      • GCP, HCP, VCP, & Cables w/ Resistors 
      • Can be purchased New/Used
      • For Full IEC 61000-4-2 Setup - Components Available!
      • Free Technical Support & 2 Days Free Transit
      • Some Models - Removable Legs
      • Turnkey Solution - Arrives Ready for Testing!

Overview

Renting and purchasing the electrostatic discharge test setup for EN IEC 61000-4-2 testing allows a quick and cost efficient solution for testing needs. This immunity test setup includes: vertical coupling plane (VCP), horizontal coupling plane (HCP), insulating paper/foil, all wood table with removable legs, ground coupling plane (GCP), and all required accessories for assembly. All of our testing equipment and accessories come with technical support.

This Equipment is quite large and needs to ship via freight.  Select Fedex ground (no charge), and then we will call you for a shipping account number or a separate payment for the shipping costs (approximately $200 each way).

Options:
  • Rent Full Setup - 1 Week $250.00
  • Rent Full Setup - 1 Month $390.00
  • Purchase $4,200.00

ESD Testing Setup/Equipment

In Stock

ESD Test Table - IEC 61000-4-2:

      • GCP, HCP, & VCP
      • Can be purchased New/Used
      • Rental Only - Pricing For Full IEC 61000-4-2 Setup
      • Free Technical Support & 2 Days Free Transit
      • Some Models - Removable Legs
      • Turnkey Solution - Arrives Ready for Testing!

Overview

Renting and purchasing the electrostatic discharge test setup for EN IEC 61000-4-2 testing allows a quick and cost efficient solution for testing needs. This table setup includes: horizontal coupling plane (HCP), insulating paper/foil, all wood table with removable legs, and all required accessories for assembly. All of our testing equipment and accessories come with technical support.

This Equipment is quite large and needs to ship via freight.  Select Fedex ground (no charge), and then we will call you for a shipping account number or a separate payment for the shipping costs (approximately $200 each way).

Options:
  • Rent Full Setup - 1 Week $250.00
  • Rent Full Setup - 1 Month $390.00
  • Purchase $3,400.00

Coupling Plane ESD Setup

In Stock

ESD Vertical Coupling Plane IEC 61000-4-2:

      • Can be purchased New/Used
      • Pricing For Full IEC 61000-4-2 Setup
      • Can be rented/purchased
      • Made to IEC 61000-4-2 Dimensions
      • Turnkey Solution - Arrives Ready for Testing!

Overview

Renting and buy the vertical coupling plane (VCP) for EN IEC 61000-4-2 for electrostatic discharge (ESD) Testing. This part of the common commercial ESD setup comes with wood stand and appropriate size metal sheet which can be put in the stand. This plane is designed to be part of a larger setup. All of our testing equipment and accessories come with technical support.

Options:
  • Rent Weekly VCP $120.00
  • Rent Monthly VCP $170.00
  • Purchase $500.00

Insulating Paper - ESD Setup

In Stock

Insulating Foil/Paper For ESD Testing:

      • Designed for ESD Testing (IEC 61000-4-2)
      • Required for a variety ESD setups/tests
      • Pricing For Full IEC 61000-4-2 Setup
      • Can be purchased by the Foot (minimum 4 feet)
      • Data Sheet With Exact Sizing Available on Request

Options:
  • Purchase 4ft $175.00
  • Purchase 5ft $200.00

Teseq ESD Target Set

ESD Pulse Target:

      • Target for precise ESD pulse measurements
      • Precise gold plated construction
      • ISO 17025 Calibration included
      • Free Technical Support & 2 Days Free Transit
      • Very small insertion loss variation
      • Includes target, attenuator and cable

Overview

The MD 102a, successor to the MD 103 , is a electrostatic discharge calibration target used for verifying waveforms of ESD simulators/guns. All the elements incorporated within the measurement chain must be matched to one another before highly accurate measurements with minimal uncertainties can be contemplated. This test accessory offers distortion-free, flat frequency characteristic up to at least 6 GHz. Transient Specialists is the only authorized sale partner of Teseq/EM Test ESD simulators and accessories in the United States. These can be ordered with purchases of new equipment or order individually to supplement existing testing capabilities. 

Faster oscilloscopes enable more complete measurements and analyses of the fast ESD pulses but, of course, the rest of the components in the measurement chain must be up to the necessary standard and exhibit the appropriate frequency response. Therefore the MD 102 set offers a complete measuring path from the target to the attenuator up to the high quality coax cable. The whole path has to be left together and should not be disassembled into parts, as the whole coupling path is calibrated in one piece. The MD102 replaces the MD101 & MD103 ESD targets.

ESD Calibration Adapter

The INA 102A is a 50 ohm calibration adapter for the MD 102A used for verifying waveforms of ESD simulators/guns. All the elements incorporated within the measurement chain must be matched to one another before highly accurate measurements with minimal uncertainties can be contemplated. Transient Specialists is the only authorized sale partner of Teseq/EM Test ESD simulators and accessories in the United States. These can be ordered with purchases of new equipment or order individually to supplement existing testing capabilities. 

Replacement ESD Battery

In Stock

Battery Pack Features

      • Designed for Teseq NSG 435
      • Older Charges - May Not Work With New Battery
      • Part Number - INA 405/402-968B
      • Ametek Warranty (2 Year) on Parts

Overview

Buy the INA 405, battery pack designed for NSG 435. Transient Specialists is the only authorized sale partner of Teseq/EM Test ESD simulators and accessories in the United States. These can be ordered with purchases of new equipment or order individually to supplement existing testing capabilities. 

Add to cart

Contact Discharge Tip

Discharge Tip Features

      • Designed for Teseq NSG 435 
      • Part Number - INA 425
      • Ametek Warranty (2 Year) on Parts
      • Turns Onto the Front of Simulator

Overview

The INA 425, contact discharge tip for the NSG 435 provides capabilities for IEC 61000-4-2 testing. It is only designed for use with the NSG 435 and NSG 434 simulator. Transient Specialists is the only authorized sale partner of Teseq/EM Test ESD simulators and accessories in the United States. These can be ordered with purchases of new equipment or order individually to supplement existing testing capabilities. 

Add to cart

Teseq & EM Test - US Distributor

Custom discharge networks for both the NSG 437 and NSG 438 electrostatic discharge simulators/guns are available upon request. These networks are designed for either the simulator and can cover a large range of testing requirements. Transient Specialists is the only authorized sale partner of Teseq/EM Test ESD simulators and accessories in the United States. These networks can be ordered with purchases of new equipment or order individually to supplement existing testing capabilities. 

Add to cart

Showing 1 to 9 of 16 products