Thermo Fisher Scientific/Keytek - Rent & Buy Used EMC Equipment

Thermo Fisher Scientific/ Keytek manufacturers surge generators, electrical fast transient (EFT) generators, and electrostatic discharge (ESD) simulators for a wide variety of applications and testing. We offer the ability to rent and buy used EMC test equipment including the ECAT system, Keytek Mz-15, and many other systems and modules. The EMC ProPlus generates lightning surge and 100khz ring wave surges to 6kV.  The MZ-15 ESD simulator allows for air discharge to 15kV and contact mode ESD to 8kV with simple, intuitive operation. The ECAT system is a modular EMC test system which complies to UL 864, Bellcore GR 1089, FCC part 68 and many other EMC immunity test standards.

Thermo Fisher Scientific/Keytek - Rent & Buy Used EMC Equipment

Thermo Fisher Scientific/ Keytek manufacturers surge generators, electrical fast transient (EFT) generators, and electrostatic discharge (ESD) simulators for a wide variety of applications and testing. We offer the ability to rent and buy used EMC test equipment including the ECAT system, Keytek Mz-15, and many other systems and modules. The EMC ProPlus generates lightning surge and 100khz ring wave surges to 6kV.  The MZ-15 ESD simulator allows for air discharge to 15kV and contact mode ESD to 8kV with simple, intuitive operation. The ECAT system is a modular EMC test system which complies to UL 864, Bellcore GR 1089, FCC part 68 and many other EMC immunity test standards.

Thermo Fisher Scientific/Keytek - Rent & Buy Used EMC Equipment

Showing 19 to 27 of 33 products

RENTAL

Thermo Keytek CM 3CD - SRG 3-Phase Surge Coupler/Decoupler For The EMC Pro Plus

The CM 3CDSrg from Thermo Keytek is a three phase external coupler for EN IEC 61000-4-5 surge tests for the EMC ProPlus.

SALE/RENTAL

ECAT E551 Rent & Buy Used - Thermo Fisher/Keytek ECAT Single Phase Surge Coupler

The ECAT E551 made by Thermo Fisher Scientific / Keytek is designed for single-phase AC line coupling/decoupling for surge wave modules. The E551 plug-in module requires the ECAT E103 control unit and an AC mains surge generator module. This Thermo Fisher / Keytek product is designed for testing to EN IEC 61000-4-5, ANSI/IEEE C62.41, UL 1449.

This Thermo Fisher Scientific / Keytek product provides monitoring and peak detection of surge voltage across any two manually-selected lines. Monitoring can be at the EUT or at the front panel of the coupler/decoupler. This product can be controlled via the front panel or with Keytek software via computer.

The modular system of the ECAT E551 has the ability to be upgraded providing the ability to upgrade test capabilities to meet the newest standard. This unit can be purchased with an ECAT E103 and AC mains surge generator for an entire EMC immunity setup. This cost effective solution is in excellent working conduction and software can be acquired with purchase.

Add to cart

SALE/RENTAL

ECAT E421 Rent & Buy Used - Thermo Fisher/Keytek 8kV EFT/Burst per IEC 61000-4-4

The ECAT E421 made by Thermo Fisher Scientific / Keytek is designed for electrical fast transients (EFT) and Burst testing to 8kV. This Thermo Fisher Scientific EMI immunity test equipment comes with an A2LA accredited calibration included with rental or purchase. The ECAT E421 plug-in module requires the ECAT E103 control unit.

This Thermo Fisher Scientific / Keytek EFT/Burst Test Equipment provides single port testing and allows changing tests modes without switching off power to the equipment under test (EUT). This helps testing with the ECATE421 be conducted efficiently without re-initializing the EUT between tests. This unit can be easily integrated with preexisting ECAT system by sliding the E421 into open bay of the ECAT E103 control unit.

The ECAT E421 is designed to test to EN/IEC 61000-4-4. All ECAT E421s are upgraded to meet the latest version of IEC 61000-4-4. The modular system provides the ability to be upgraded providing the ability to upgrade test capabilities to meet the newest standard. This cost effective solution is in excellent working conduction and software can be acquired with purchase.

Add to cart

RENTAL

ECAT E503 Rental - Thermo Fisher/Keytek 100khz Ringwave to 6kV Module

The ECAT E503 by Thermo Fisher/Keytek is designed as a Ringwave generator up to 100kHz at 6kV. This Thermo Fisher Scientific EMI immunity test equipment rental comes with an A2LA accredited calibration and free technical support included. This rental is only for the ECAT E503 and not the ECAT E103 control control unit or other modules. 

This Thermo Fisher Scientific / Keytek EMC immunity generator provides single port testing and allows changing tests modes without switching off power to the equipment under test (EUT). This helps testing with the E503 be conducted efficiently without re-initializing the EUT between tests. The ECAT E103 is required for use and both ECAT units can be rented as an ECAT E103 & E503 combination.

The ECAT E503 is designed for testing to EN/IEC 61000-4-12, ANSI IEEE C62.41 Cat A& B, ANSI C62.45, UL864, and many other ringwave based standards. The modular system of this Thermo Fisher / Keytek product provides the ability to be upgraded providing the ability to upgrade test capabilities to meet the newest standards. The E503 and E513 combination can be controlled via front panel or through computer using Keytek software.

RENTAL

ECAT E506-4W Rental - Thermo Fisher/Keytek Bellcore 2x10µs Telecom Surge

The ECAT E506-4W module made by Thermo Fisher Scientific / Keytek is designed for Immunity testing to a variety of standards having telecom (2x10µs) waveform requirements on multiple terminals. This Thermo Fisher Scientific EMC immunity test equipment comes with free technical support included with the rental. The ECAT E 506 plug-in module requires the ECAT E103 control unit for use.

This Thermo Fisher Scientific / Keytek EMC Test Equipment provides single port testing and allows changing tests modes without switching off power to the equipment under test (EUT). This helps testing with the E506-4W to be conducted efficiently without re-initializing the EUT between tests. The ECAT E103 is required for use and both units can be rented as an ECAT E103, E506-4W, E508 & E509 telecom EMC immunity test system. 

The ECAT E506 4W designed to test GR-1089-CORE and and many other telecommunication based standards. This unit can be easily integrated with preexisting ECAT system by sliding the E5064W into open bay of the ECAT E103 control unit. The E103 and E506 combination can be controlled via front panel or through computer using Keytek software.

RENTAL

ECAT E508 Rental - Thermo Fisher/Keytek Bellcore 10x360µs Telecom Surge

The ECAT E508 module made by Thermo Fisher Scientific / Keytek is designed for Immunity testing to a variety of standards having telecom 10x360µs waveform requirements. This Thermo Fisher Scientific EMC immunity test equipment comes with free technical support included with the rental. The ECAT E 508 plug-in module requires the ECAT E103 control unit for use.

This Thermo Fisher Scientific / Keytek EMC Test Equipment provides single port testing and allows changing tests modes without switching off power to the equipment under test (EUT). This helps testing with the E508 to be conducted efficiently without re-initializing the EUT between tests. The ECAT E103 is required for use and both units can be rented as an ECAT E103, E506-4W, E508, & E509 Telecom EMC immunity test system. 

The ECAT E508 is designed to test GR-1089-CORE and and many other telecommunication based standards. This unit can be easily integrated with preexisting ECAT system by sliding the E508 into open bay of the ECAT E103 control unit. The E103 and E508 combination can be controlled via front panel or through computer using Keytek software.

RENTAL

Thermo Keytek ECAT E509 - Bellcore GR1089 10 x 1000 Microsec. Telco Surge Network

Thermo Keytek E509a ECAT module generates the 10 X 1000µs waveform for testing per GR 1089-CORE, requires the E103 controller. 

RENTAL

Thermo Keytek ECAT E510 - 10kV Combination Wave Surge Network

Thermo Keytek, E 510 Bi-wave Surge module to 10kV per IEC 61000-4-5 for the ECAT system, requires the E103 controller.

SALE/RENTAL

ECAT EP62 Rent & Buy Used - Thermo Fisher/Keytek Dips & Interrupts IEC 61000-4-11

The ECAT EP62 made by Thermo Fisher Scientific / Keytek is designed to provide swells, dips, and interrupts(PQF) on power mains up to 240v and 32a. This Thermo Fisher Scientific EMI immunity test equipment comes with an  A2LA accredited calibration included with rental or purchase. The EP 62 plug-in module requires the ECAT E103 control unit.

This Thermo Fisher Scientific / Keyte test equipment provides single port testing and allows changing tests modes without switching off power to the equipment under test (EUT). This helps testing with the EP62 be conducted efficiently without re-initializing the EUT between tests. This unit can be easily integrated with preexisting ECAT system by sliding the EP62 into open bay of the ECAT E103 control unit.

The ECAT EP62 is designed to test EN IEC 61000-4-11 and is compliant to single phase of this EMI Immunity standard. The modular system provides the ability to be upgraded providing the ability to upgrade test capabilities to meet the newest standard. The EP62 is a cost effective solution and in excellent working conduction and software can be acquired with purchase.

Add to cart

Showing 19 to 27 of 33 products