NX7 CDN Auto 3-Phase 32A
EM Test Coupling NX7 - Rental bsr-3-480-32 CDN
Auto Coupling/Decoupling Network (CDN) Features
- 3-Phase EFT & Surge (480V/32Amps)
- ISO 17025 Calibration included
- Fully automated surge and/or burst coupling
- Free Technical Support & 2 Days Free Transit
- Used for the NX7 series of Transient Generators
- Turnkey Solution - Arrives Ready for Testing!
Overview
The BSR-3-480-32 is an automated 3-phase coupler decoupler network (CDN) designed for electrical fast transients/burst and surge testing to IEC 61000-4-4 and IEC 61000-4-5. This equipment is limited to 3 x 480 VAC with a current rating of 32 Amps 50/60 Hz for the EUT. It provides coupling in accordance with EN/IEC 61000-4-4, EN/IEC 61000-4-5, and EN/IEC 61000-4-12 for burst up to 5.5kV, surge and ring wave to 7kV. This network can be rented with the EM Test NX7 series, or individually to supplement testing needs. This system comes standard with a current ISO 17025 accredited calibration and associated documentation. This CDN can be controlled via the immunity generator or through control software via PC.
Coupling Accessories
10kV HV Differential Probes
10kV HV Probe Features
- 10kV High Voltage Probes - Ideal for EMI
- 200:1 Attenuation; Low EMI sensitivity
- BNC Connection to Oscilloscope
- Convenient to use & Self Interlock system
- Arrives Ready for Testing!
Overview
The differential oscilloscope probes normally used for monitoring high voltage surges and transients are generally large and cumbersome (because they are designed for use to 40 kV), unduly sensitive to noise, and difficult to maintain in close compensation adjustment. KeyTek'sModel PK 1001Dis a relatively small, lightweight probe designed to provide accurate transmission of peak surge waves to 6 kV,with fronts from 10 ns to 1.2.
Its relatively low input impedance provides low sensitivity to noise. Quick and convenient to use, the Model PK 1001 requires no ground at the probe tip, and no compensation adjustments. An auxiliary interlock unit ensures a high degree of operator safety during probe use.
Differential HV Monitoring Probe
Differential Probe Features
- Selectable attenuation settings of 100x/1000x
- 70 MHz bandwidth (-3 dB)
- Power and over-range indicators
- Up to ±7 kV differential and common mode
- High CMRR
Overview
Differential probes allow safe, accurate measurement between two voltage points where neither point is referenced to ground. The CT3681 and CT3683 both offer a 70 MHz bandwidth and can test up to ±7 kV (DC + AC peak). Compatible with oscilloscopes from all major manufacturers, the probes can be battery operated, powered by a universal adapter (optional), or powered by USB power lead (optional) if the oscilloscope is so equipped
Keytek EFT CCL
Coupling Clamp (CCL) Features
- Thermo Keytek Design Includes Cords
- ISO 17025 Calibration & 2 Days Free Transit
- Compliant IEC 61000-4-4 Ed.2 & Ed.3
- Can Work With Many Immunity Generators!
- Turnkey Solution - Arrives Ready for Testing!
Overview
The capacitive coupling clamp by Thermo-Keytek is designed for EFT pulses on I/O lines or data lines per EN/IEC 61000-4-4. This equipment is fully compliant with the specifications of IEC 61000-4-4 Ed 2.0 2004, as well as with the draft of EN/IEC 61000-4-4 Ed 3.0 published in 2012. These testing accessories have the capabilities to work with a variety of conducted immunity generators from many manufacturers, making it an ideal solution.
Waveform Verification Devices
Burst/EFT Pulse Verification Kit
- Verification/calibration kit for IEC/EN 61000-4-4
- For peak voltages up to 8.8 kV
- INA 265B: 50 Ω termination
- INA 266A: 1 kΩ termination
- Turnkey Solution - Arrives Ready for Testing!
Overview
The Teseq CAS3025 burst/EFT pulse verification kit has been specially designed to comply with the new requirements of IEC/EN 61000-4-4:2004 to enable EMC engineers to verify their burst/EFT test generators periodically. Many EMC standards call for a verification of the test equipment before and after every test session. If the verification shows differing results, no valid test results can be assumed and the test equipment has to be re-calibrated.
Teseq EFT CCL
Coupling Clamp (CCL) Features
- New design, Includes Safety Cover & Interlock
- ISO 17025 Calibration & 2 Days Free Transit
- Compliant IEC 61000-4-4 Ed.2 & Ed.3
- Can Work With Many Immunity Generators!
- Replaces CDN 8014 and CDN 8015
- Turnkey Solution - Arrives Ready for Testing!
Overview
The Teseq CDN3425 (Teseq CCL) main purpose is to couple Burst/EFT pulses to data lines. It can also be used to couple to mains lines where no CDN is available; for example, high current lines >200 A. This coupling decoupling network (CDN) capacitive coupling clamp (CCL) comes with an ISO 17025 accredited calibration and works with a many conducted immunity generators.
The new design is fully compliant with the specifications of IEC 61000-4-4 Ed 2.0 2004, as well as with the draft of EN/IEC 61000-4-4 Ed 3.0 to be published in 2012. This model also replaces earlier models CDN 8014 and CDN 8015.The coupling capacitance between the coupling clamp and the cable laid in it depends on the cable characteristics.
Current Monitoring Probe
Current Monitoring Features
- Maximum Peak Current - 5000 Amperes
- ISO 17025 Accredited Calibration included
- Pearson Electronics Monitor Model 110
- Useable rise time 20 Nanoseconds
- Output Resistance 50 Ohms
- Turnkey Solution - Arrives Ready for Testing!
Overview
Pearson Model 110 Current Probe. Donut shaped for current monitoring up to 5000 Amps .1 Volts per Amp. attenuation.
6kV Differential HV Probe
6kV HV Probe Features
- 6kV High Voltage Probes - Ideal for EMI
- 200:1 Attenuation; Low EMI sensitivity
- BNC Connection to Oscilloscope
- Convenient to use & Self Interlock system
- Arrives Ready for Testing!
Overview
The differential oscilloscope probes normally used for monitoring high voltage surges and transients are generally large and cumbersome (because they are designed for use to 40 kV), unduly sensitive to noise, and difficult to maintain in close compensation adjustment. KeyTek'sModel PK 1001Dis a relatively small, lightweight probe designed to provide accurate transmission of peak surge waves to 6 kV,with fronts from 10 ns to 1.2.
Its relatively low input impedance provides low sensitivity to noise. Quick and convenient to use, the Model PK 1001 requires no ground at the probe tip, and no compensation adjustments. An auxiliary interlock unit ensures a high degree of operator safety during probe use.
20kV High Voltage Probe
Differential Probe Features
- Attenuation settings 1000:1, +/-5%
- Frequency: DC-75MHz
- Part Number: 070-0373-02
- Input Resistance 100 Megohms
- Max W/out Dialectic Fluid 13kV to 2MHz
Overview
The P6015 high-voltage probe is a dc-to-75 MHz, 1000x attenuator probe that adds high-voltage capabilities to oscilloscopes with input resistances of 1MegaOhms paralleled by 12pF to 60pF. This probes body is made of high-impact thermoplastic material that provides mechanical protection for its internal components and electrical protection for the user. The probe's dielectric properties can be improved by filling it with fluorocarbon gas.
The standard probe includes a 10-foot interconnecting cable with a resistive center conductor, and the compensating box. The probes and instruments must be used and calibrated at a temperature between 20 degree and 30 degree Celsius.
Teseq HV 7kV Probe
Differential Probe Features
- Surge pulse measurements
- Power quality measurements
- Rated for 7000 V/70 MHz, differential mode
- 2 ranges: 1:1000 and 1:100
- Compatible with all types of oscilloscope
- Suitable for simple burst pulse verification
Overview
The Teseq MD 210 high voltage differential probes are ideally suited to allow EMC engineers to verify their conducted EMC test generators periodically. Their performance permits to be used for many other purposes where higher voltages have to be measured in a potential free manner.
15kV HV Monitoring Probe
Features
- Meets IEC 61010-031 safety standard
- Up to ±1.5 kV / ±15 kV differential
- 50 MHz bandwidth (-3 dB)
- Excellent CMRR
- Power and over-range indicators
Overview
Use the CT4079-NA 50-MHz differential probe to make safe and accurate floating measurements with an oscilloscope. The CT4079-NA differential probe allows conventional earth-grounded oscilloscopes to be used for floating signal measurements of up to ±15 kV for both differential and common mode voltage. User applications include: Precise power semiconductor device measurements, switching power supply design, measurement of power converters and precise measurement of motor drives.
200 Amp Monitoring Probe
Current Monitoring Features
- Maximum RMS Current - 200 Amperes
- ISO 17025 Accredited Calibration included
- Pearson Electronics Monitor Model 101
- Useable rise time 100 Nanoseconds
- Output Resistance 50 Ohms
- Turnkey Solution - Arrives Ready for Testing!
Overview
Pearson Model 101 Current Probe. Donut shaped for current monitoring up to 50000 Amps .1 Volts per Amp. attenuation.
Auto Coupling/Decoupling Network (CDN) Features
- 3-Phase EFT & Surge (480V/32Amps)
- ISO 17025 Calibration included
- Fully automated surge and/or burst coupling
- Free Technical Support & 2 Days Free Transit
- Used for the NX7 series of Transient Generators
- Turnkey Solution - Arrives Ready for Testing!
Overview
The BSR-3-480-32 is an automated 3-phase coupler decoupler network (CDN) designed for electrical fast transients/burst and surge testing to IEC 61000-4-4 and IEC 61000-4-5. This equipment is limited to 3 x 480 VAC with a current rating of 32 Amps 50/60 Hz for the EUT. It provides coupling in accordance with EN/IEC 61000-4-4, EN/IEC 61000-4-5, and EN/IEC 61000-4-12 for burst up to 5.5kV, surge and ring wave to 7kV. This network can be rented with the EM Test NX7 series, or individually to supplement testing needs. This system comes standard with a current ISO 17025 accredited calibration and associated documentation. This CDN can be controlled via the immunity generator or through control software via PC.
Data SheetApplication Guide - CDNs|
Common Standards |
EN/IEC 61000-4-4, EN/IEC 61000-4-5, EN/IEC 61000-4-12 |
|
|
Other optional CDN’s available |
|
AC/DC Voltage |
3 x 480 VAC (P-P), single or 3 phase |
|
AC/DC Current |
32 A continuous, Max 50A for 10 min. |
Included with Rental
Below you will find a list of common accessories that you can expect to be delivered with the equipment. This is a generic standard list and should you require an exact connector or accessory please contact us prior to order shipping.
bsr-3-480-32
- Coupling NX7
- Power Cord
-
Calibration Documentation
- HVSurge .3m Red banana-banana cable
- HVSurge .3m Black banana-banana cable
- SHV to SHV EFT cord
- USB Stick
- 0.5m D-shape System Link Cable
- (3pcs) Black Safety Cable
- (1pcs) 2m Blue Safety Cable
- (1pcs) 2m Yellow/Green safety cable
- Earth Connection 22cm Braided w/ 4 screws.
- ESA2 EUT Supply adapter box
- 3 Phase Red Connector
I would recommend Transient Specialists. Transient Specialists always provides quality products within the established timeframes. The equipment always meets the specifications and properly shipped within the time frames within the time frames promised.
Scott D., TUV SUD Canada
Transient Specialists has been outstanding at working with us for our specialized EMC equipment rental needs. Fast shipments and excellent accommodation for some customized setups. I recommend them highly and they are a pleasure to partner with!
John H., Gates Air, Inc.
Laura, I want to thank you and Goran for your excellent customer service and turn around time on the rentals and the calibration documents.
Adam P., Clark Testing
Working for a testing company I deal with renting equipment all the time. Transient Specialist is the first company I call on my list of rental houses because of their great personnel, prompt delivery of the equipment, knowledgeable and accommodating to the customers needs.
Richard T., National Technical Systems
